SPECIFICATIONS
Function
Cable Distance
(D/A to Display)
Max Resolution
Max Bandwidth
Signal Type
Audio & Video
Multi-Port Active
CAT5e/6 Ext. Kit
OVERVIEW
Specification
1,000ft max.
Broadcast audio & video to multiple locations simultaneously
using AV Multi-Port Active CAT5e/6 Distribution Amplifier
(D/A) Extender Kit. Its built-in video extender ensures clear and
sharp images as far as 1,000ft away from your CPU. Use it to
enhance your presentations as well as broadcasting of real-time
data. It is ideal for classrooms and training facilities, remote
security monitoring and digital signage applications. To ensure
the best video integrity, it has a 150MHz video bandwidth that
supports resolution of up to 1600x1200 @ 60Hz.
1600x1200 60Hz
150 MHz
VGA/UXGA, Multisync
30 – 110KHz
Horizontal Frequency
Vertical Frequency
56 – 85Hz
Operating Temperature 5 – 40o C
Storage Temperature
Humidity
Housing
-20 – 60o C
0 – 80% RH, Non-condensing
Metal
In addition, the D/A Extender Kit can be daisy chained up to
three levels to connect as many as 17 monitors and speakers,
making it an excellent solution for public broadcast systems.
INSTALLATION
1. Use a high density HD15 male/male video and 3.5mm audio
cable (CC388MA) to connect the PC’s audio & video port to
the Audio-In and Video-In port of the distribution amplifier.
2. Use a high density HD15 male/male video and 3.5mm audio
cable (CC388MA) to connect the display and speaker to
receiver’s Audio-Out and Video-Out ports.
FEATURES
ƒ Economical A/V extender in wall mountable modules
ƒ Provides pass-thru port for local monitor and speaker
ƒ TX also provides 4 expansion port
ƒ RX has built-in 2-Port D/A and daisy chain port
ƒ RX provides equalization and gain control
ƒ Works with flat panels, projectors and HDTV’s
ƒ Connect large monitors with HD15 input port
ƒ Supports VGA/UXGA up to 1600x1200 @ 60Hz
ƒ Cascade capability provides for future expansion
ƒ Compact design with shielded metal casing
ƒ One Year Limited Warranty
3. Connect the TX module to the RX module using a solid
CAT5e or CAT6 cable with T568B wiring termination.
4. Plug the power adaptors into an AC source
5. Turn on the monitors and the PC.
6. Adjust Gain (brightness) and EQ (cable equalization) as
needed.
USER MANUAL
Note:
DISTANCE RESOLUTION MATRIX
Please use the listed resolution matrix as a guide for setting the
monitors. Some results may vary depending on the frequency,
type and size of displays.
1. If you connect a DDC type monitor to Video-Out Port 1, all
other monitors must be able to support the highest resolution
of that DDC monitor.
Read this manual thoroughly, and follow the installation and
operation procedures carefully to prevent any damage to the unit,
and/or any of the devices connected to it.
2. This designed for VGA/UXGA, and Multisync monitors. It is
not suitable for CGA, EGA, or MONO-type monitors, or
those that use digital video signals like DVI-D or DFP.
3. For maximum performance, install it away from devices that
produce high heat or electrical noise. Keep well ventilated.
Up to 1600 x 1200 @ 60Hz
Up to 1280 x 1024 @ 60Hz
Up to 1024 x 768 @ 60Hz
Up to 800 x 600 @ 60Hz
Up to 640 x 480 @ 60Hz
Up to 330ft
Up to 395ft
Up to 590ft
Up to 660ft
Up to 1,000ft
VA-EXK Starter Kit:
ƒ(1) 4-Port Transmitter Module
ƒ(1) Receiver/Repeater Module
ƒ(2) DC 12v 1.2A Universal Power Adaptor
ƒUser Manual
RECOMMENDED CABLES
DAISY CHAINING
Connect additional RX modules to an existing RX module’s
CAT5 loop-out port. You can expand up to 3 levels.
VA-EXR RX Expansion Module:
ƒ(1) Receiver/Repeater Module
ƒ(1) DC 12v 1.2A Universal Power Adaptor
ƒUser Manual
CC388MA Series - an HD15M/M triple shielded high quality
video cable with audio to connect your computer to distribution
amplifier/extender. It is available in standard lengths of 3, 6, 10,
15, 25, 35 & 50ft. (Must be purchase separately.)
[SOLID CAT5E IS REQUIRED. CAT6 IS RECOMMENDED]
For additional technical support,
send an email to: [email protected].
INSTALLATION DIAGRAM:
Daisy Chain Up to 3 Levels
(Expansion thru RX Module Loop-Out Port)
|