Salton Blender BL22 User Guide

OWNER’S MANUAL  
Model No. BL22 Series  
(covers all models)  
Salton®  
P E R S O N A L B L E N D E R  
 
ADDITIONAL IMPORTANT SAFEGUARDS  
1. All users of this appliance must read and understand this Owner’s  
Manual before operating or cleaning this appliance.  
2. The cord to this appliance should be plugged into a 120V AC  
electrical outlet only.  
3. Do not leave this appliance unattended during use.  
4. If this appliance begins to malfunction during use, immediately  
press and release the OFF/PULSE Button and unplug the cord. Do  
not use or attempt to repair the malfunctioning appliance.  
5. If this appliance falls or accidentally becomes immersed in  
water, unplug it immediately. Do not reach into the water!  
Do not use this appliance after it has fallen into or becomes  
immersed in water.  
6. To reduce the risk of injury to persons or property, never use this  
appliance in an unstable position.  
7. Do not use this appliance for other than its intended use.  
8. Do not use if the Blending Jar is cracked or chipped.  
POLARIZED PLUG  
This appliance has a polarized plug (one blade is wider than the  
other). To reduce the risk of electric shock, this plug is intended to fit  
into a polarized outlet only one way. If the plug does not fit fully in  
the outlet, reverse the plug. If it still does not fit, contact a qualified  
electrician. Do not attempt to modify the plug in any way.  
SHORT CORD INSTRUCTIONS  
A short power supply cord is provided to reduce the risk resulting  
from becoming entangled in or tripping over a longer cord.  
Do not use an extension cord with this product.  
PLASTICIZER WARNING  
CAUTION: To prevent Plasticizers from migrating from the finish of  
the counter top or table top or other furniture, place  
NON-PLASTIC coasters or place mats between the appliance  
and the finish of the counter top or table top.  
Failure to do so may cause the finish to darken, permanent blemishes  
may occur or stains can appear.  
ELECTRIC POWER  
If the electrical circuit is overloaded with other appliances, your  
appliance may not operate properly. It should be operated on a  
separate electrical circuit from other appliances.  
2
 
®
GETTING TO KNOW YOUR SALTON  
PERSONAL BLENDER  
PRODUCT MAY VARY SLIGHTLY FROM ILLUSTRATION  
1.  
1. Cap (P/N 71152)  
2. Blending Jar Lid (P/N 71153B)  
2.  
3. Pour Spouts  
4. Blending Jar (P/N 71154)  
5. Blade Assembly  
6. Motor Housing  
7. ON & OFF/PULSE Buttons  
3.  
4.  
5.  
8. Power Cord with  
Polarized Plug  
9. Non-Slip Rubber Feet  
(NOTE: All replacement lids are black in color.)  
8.  
6.  
7.  
FIGURE 1  
9.  
BEFORE USING FOR THE FIRST TIME  
CAUTION: Use extreme care when handling the Blade Assembly.  
Do not touch the Blades with your fingers. The Blades are very  
sharp and can cause injury if touched.  
1. Carefully unpack the Blender, Blending Jar, and all parts.  
2. Wash the Cap, Blending Jar and Blending Jar Lid in warm soapy  
water. Rinse and dry thoroughly.  
3. Make sure the cord is unplugged and press and release the  
OFF/PULSE Button.  
CAUTION: To protect against risk of electrical shock, do not place  
Motor Housing, plug or cord in water or any other liquid.  
4. Wipe the Motor Housing clean with a moistened cloth.  
Dry thoroughly.  
3
 
BLENDER ASSEMBLY INSTRUCTIONS  
NOTE: Before assembling, make sure the cord is unplugged and press  
and release the OFF/PULSE Button.  
CAUTION: Use extreme care when handling the Blade Assembly.  
Do not touch Blades with your fingers. The Blades are very sharp  
and can cause injury if touched.  
1. Carefully place the Blending Jar over the Motor Housing with the  
Pour Spouts facing to either side as seen in Figure 1.  
2. Blending Jar should then drop into the Motor Housing and lock  
into place.  
NOTE: The Blending Jar must be firmly attached to the Motor  
Housing before putting any foods or liquids into the Blending Jar.  
OPERATING INSTRUCTIONS  
CAUTION: Keep hands and utensils out of the Blending Jar while  
blending to prevent the possibility of severe injury to persons or  
damage to the unit. A scraper may be used but must only be used  
when the unit is not running.  
CAUTION: Use extreme care when handling the Blender Blade.  
Do not touch Blades with your fingers. The Blades are very sharp  
and can cause injury if touched.  
1. Before starting, make sure power cord is unplugged and press and  
release the OFF/PULSE Button.  
2. Make sure that the Blending Jar is securely fastened to the Motor  
Housing. See Assembly Instructions for details.  
CAUTION: Never place the Blade Assembly on the Motor Housing  
without the Blending Jar being completely assembled and  
securely in place.  
3. Add ingredients to the Blending Jar.  
NOTE: Do not fill the Blending Jar more than 3/4 full (22-oz.) Never  
operate when the Blending Jar is empty.  
4. Place Blending Jar Lid with Cap on Blending Jar. Remember:  
Always hold Lid in place during processing.  
NOTE: When placing Blending Jar Lid with Cap onto the Blending Jar  
make certain that the longer inner lips of the Blending Jar Lid with  
Cap are aligned with the two Pour Spouts to insure no leakage  
occurs while blending.  
5. Plug the power cord into a 120V AC electrical outlet. Press  
the ON Button. Blend until ingredients have reached desired  
consistency.  
4
 
CAUTION: If Blending Jar rotates during blending, immediately  
press and release the OFF/PULSE Button, then make sure that  
the Blending Jar has fully dropped into the Motor Housing and  
is locked into place as described in the Blender Assembly  
Instructions.  
• Do not touch Blades  
• Do not interfere with the Blade movement  
• Do not remove Blending Jar Lid  
6. When blending is completed, press and release the OFF/PULSE  
Button to stop the Blender and unplug the unit.  
PULSE FUNCTION  
• To activate PULSE function press and hold down the  
OFF/PULSE Button. Release Button to cease function and stop  
Blender.  
NOTE: When using PULSE Function to crush ice, add 1 tablespoon  
of water for every 5 ice cubes. Do not try to crush more than 5  
ice cubes at a time.  
HOT INGREDIENTS  
CAUTION: Use extreme caution when blending hot liquids to  
avoid accidental scalding or burns. Do not use your hand to  
cover opening!  
NOTE: When processing hot foods, always remove the Cap from  
the Lid before beginning.  
• DO NOT put more than 7 ounces of hot ingredients into the  
Blending Jar before beginning to blend.  
• After the blending process has begun, you may slowly add up  
to an additional 7 ounces of hot ingredients through the center  
hole in the Lid.  
• Always use a vessel with a pouring spout when adding hot  
ingredients.  
5
 
USER MAINTENANCE INSTRUCTIONS  
This appliance requires little maintenance. It contains no user  
serviceable parts. Do not try to repair it yourself. Any servicing that  
requires disassembly other than cleaning must be performed by a  
qualified appliance repair technician.  
CAUTION: Never immerse the Motor Housing, plug or cord in  
water or any other liquid.  
1. Always unplug the unit before cleaning.  
2. Whenever possible, rinse parts immediately after processing to  
make cleanup easier.  
CAUTION: Use extreme care when handling the Blade Assembly.  
Do not touch the Blades with your fingers. The Blades are very  
sharp and can cause injury if touched.  
3. Wash the Blending Jar, Lid, and Cap in warm soapy water. Rinse  
and dry thoroughly. Never use rough scouring pads or abrasive  
cleansers on any plastic or metal parts as the surface may be  
damaged. Do not wash the Lid, Cap and Blending Jar in the  
dishwasher.  
4. If necessary, wipe exterior surface with a moist cloth or sponge  
and dry thoroughly.  
5. Do not fill the Blending Jar with boiling water or place any of the  
parts in boiling water.  
6. Do not allow the Blade Assembly to soak in water for long  
periods of time.  
7. For quick clean-ups, the interior of the Blending Jar can be  
cleaned by turning the Blender ON and OFF for several short  
bursts. The unit will clean itself, without you having to handle the  
sharp Blades. Unplug the Blender, rinse and dry thoroughly, being  
careful as the Blades are sharp.  
8. Properly reassemble all parts before storing.  
STORAGE  
CAUTION: Always assemble clean and dry Blender parts correctly  
before storing on the Motor Housing. Severe injury can result if  
Blender is accidentally turned ON when not properly assembled.  
Unplug and clean unit. Store in original box or in a clean, dry place.  
Never store Blender while it is hot or plugged in. Never wrap cord  
tightly around the appliance. Never place any stress on cord,  
especially where the cord enters the unit, as this could cause the cord  
to fray and break.  
6
 
LIMITED ONE YEAR WARRANTY  
Warranty Coverage: This product is warranted to be free from defects in materials or workmanship for  
a period of one (1) year from the original purchase date. This product warranty is extended only to the  
original consumer purchaser of the product and is not transferable. For a period of one (1) year from  
the date of original purchase of the product, our Repair Center will, at its option, either (1) repair the  
product or (2) replace the product with a reconditioned comparable model. These remedies are the  
purchaser's exclusive remedies under this warranty.  
Warranty Service: To obtain warranty service, you must call our warranty service number at  
1-800-233-9054 for return instructions on how to deliver the product, in either the original packaging  
or packaging affording an equal degree of protection to the Repair Center specified below. You must  
enclose a copy of your sales receipt or other proof of purchase to demonstrate eligibility for warranty  
coverage.  
To return the appliance, ship to:  
To contact us, please write to, call, or email:  
ATTN: Repair Center  
708 South Missouri Street  
Macon, MO 63552 USA  
Consumer Relations Department  
PO Box 7366  
Columbia MO 65205-7366 USA  
1-800-233-9054  
E-mail:  
What Is Not Covered: This warranty does not cover damage resulting from misuse, accident,  
commercial use, improper service or any other damage caused by anything other than defects in  
material or workmanship during ordinary consumer use. This warranty is invalid if the serial number  
has been altered or removed from the product. This warranty is valid only in the United States and  
Canada.  
LIMITATION ON DAMAGES: THERE SHALL BE NO LIABILITY FOR ANY INCIDENTAL OR  
CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR  
CONDITION ON THIS PRODUCT.  
DURATION OF IMPLIED WARRANTIES: EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW,  
ALL IMPLIED WARRANTIES AND CONDITIONS, INCLUDING, WITHOUT LIMITATION, IMPLIED  
WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE  
OR USE ON THIS PRODUCT ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.  
Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or  
allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not  
apply to you. This warranty gives you specific legal rights and you may have other rights under the  
laws of your jurisdiction.  
For more information on our products, visit our website: www.maxim-toastmaster.com.  
Made in China  
05/05  
P/N 61707  
 

Radio Shack Conference Phone ET 469 User Guide
RCA CRT Television 20F530T User Guide
RCA Graphics Tablet RCT6293W23 User Guide
Rockford Fosgate Network Card IB 200 User Guide
Russell Hobbs Microwave Oven RHM2306 User Guide
Sanyo Cell Phone SCP 8300 User Guide
SECO LARM USA Digital Camera EV 132C DLW6Q User Guide
SECO LARM USA Home Security System EV 5120 N3WQ 480 TV User Guide
Sennheiser Headphones HD 410 User Guide
Sennheiser Headphones HDC 55 User Guide